XTC-3D epoxy resin
XTC-3D™ is a protective coating for smoothing and finishing 3D printed parts.
Mix Ratio (by volume): 2:1
Mix Ratio (by weight): 100:42
Shore Hardness (Shore D): 80 D
Working Time: 20 min
Tack Free Time: 4h (Thin Film Recoat Time 90 minutes)
EpoxAcast 690 Clear Casting Epoxy Resin 1.18kg
EpoxAcast™ 690 is a clear casting epoxy that is ideal for making clear jewelry/beads or replacement lenses for kit cars and other applications requiring a rigid, clear finished product.
Mixing ratio (by weight): 100A: 30B
Hardness (Shore D): 80 D
Curing time: 24 hours
Pot Life: 5 hours
Skin Tite and Thi-vex Kit – Silicone Adhesive and Special Effects
• Skin Tite part B – 56g
• Skin Tite part A – 56g
• Thi-vex thickener – 30g
Mixing ratio: 1A:1B (by weight)
Pot life: 3 min.
Setting time at room temperature: 5 min
BODY DOUBLE release cream 100g
BODY DOUBLE Release Cream is a non-toxic skin conditioner that will aid in releasing BODY DOUBLE mold rubber from skin surfaces with or without hair. It washes off with soap and water. It is highly concentrated, so a little goes a long way. To use, wash intended body section with soap and water and dry thoroughly. … Read More
Psycho Paint platīna silikona krāsas bāze
Measuring Is Done By Volume – The recommended mix ratio is 100 Parts A + 100 Part B + 200-500 Parts Solvent depending on your application (hand painting vs. airbrushing).
Adding Color To Psycho Paint – Silc Pig silicone pigments are compatible with Psycho Paint. There are several colors to choose from, and you can mix colors to create custom colors. The most accurate way to add pigment is by weight (using a gram scale). We recommend beginning by pre-mixing 2% pigment by weight to Part B and pre-mixing thoroughly. Do not exceed a 5% pigment load of the total weight (A+B). You can also use powdered cosmetic pigments to color Psycho Paint™, however a compatibility test is recommended.
NOVOCS solvent 340g
Materials should be stored and used in a warm environment (73°F / 23°C). This material has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.
Mix the A and B components of two component silicone sytems before adding NOVOCS. Add the desired proportion of NOVOCS solvent to create a thinner silicone mixture which can be brushed or airbrushed onto the surface of a cured silicone casting.
Example Recommended Ratios For Use:
- When adding to Psycho Paint, add between 200%-400% NOVOCS™ solvent by weight
- When adding to Sil-Poxy, add between 300%-500% NOVOCS™ solvent by weight
Ignite fluorescent color pigments 9x10g
When you add Ignite fluorescent color to a urethane material, more ultraviolet light from the cured material is visible to your eye vs. castings made with SO Strong™ colorants. The casting appears brighter in ambient light and appears to glow under ultraviolet light.