A1 sealer SEALER PLUS
A1 Sealer PLUS is a water-based coating to protect A1 against weather influences such as UV and moisture.
A1 Sealer PLUS is a concentrated solution of high-quality acrylics in water. The A1 Sealer PLUS is a so-called breathable coating. The surface to be sealed must be free of wax, oil, dirt or dust. Apply by brush, roller, wiping with a soft cloth, or by spraying.
If the A1 Sealer PLUS is applied by brush, we recommend adding 30% water. After applying the A1 Sealer PLUS with a brush, the A1 Sealer PLUS should be rubbed with a dry cloth while it is still damp. Apply a maximum of 3 layers of A1 Sealer PLUS to the A1 object in this way. These layers can be applied consecutively with a short drying period of a few minutes. The consumption of the A1 Sealer PLUS per kg applied by brush is 8 to 10 m2.
When spraying the A1 Sealer PLUS, we recommend adding up to 50% water. Because of the atomization of the A1 Sealer PLUS, it is not necessary to scrub afterwards. The consumption when spraying the A1 Sealer PLUS per kg is 10 to 12 m2.
The advantages are:
- 1 component,
- free of solvents,
- water based,
- quick drying,
- easy to apply,
- good UV-resistance,
- excellent adhesion,
- dirt resistant and water resistant.
– Minimum processing temperature: 10°C
– Average consumption: 8-10 m2 per liter
– Shelf life: 1 year in closed packaging
– Storage: Store frost-free and out of direct sunlight