The Cast Magic™ Casting System is a new and easy way to add an endless variety of bright metallic, glitter & color effects to finished castings. Cast Magic™ is also good for reproducing sculpture and adding different cast effects to models and prototypes. With the Cast Magic™ System, you can create spectacular casting effects in a matter of minutes vs. hours or days for hand tooling and finishin.
You must be logged in to post a review.
Powercolor is a colour pigment that can be used in different ways with Powertex products. Powercolor can be mixed with Powertex transparent to make coloured Powertex of your choice. Powercolor can also be used in combination with Easy Varnish to paint and dry-brush your artwork. Different colours of Powercolor can be mixed together to make new … Read More
When you add Ignite fluorescent color to a urethane material, more ultraviolet light from the cured material is visible to your eye vs. castings made with SO Strong™ colorants. The casting appears brighter in ambient light and appears to glow under ultraviolet light.
Crystal Clear 202 fully transparent polyurethane resin for castings up to 2 cm in thickness.
Mixing ratio (by weight): 100A: 90B
Hardness (Shore D): 80 D
Working time: 9 min
Curing time: 90 min
Mix Ratio By Volume: 1A:2B
Pot Life: 35 seconds
Cure Time: 2 hours
Foam Density: 3 lb/ft³
Mixed Viscosity: 1000 cps
Expansion (approximate): 15 times
Measuring Is Done By Volume – The recommended mix ratio is 100 Parts A + 100 Part B + 200-500 Parts Solvent depending on your application (hand painting vs. airbrushing).
Adding Color To Psycho Paint – Silc Pig silicone pigments are compatible with Psycho Paint. There are several colors to choose from, and you can mix colors to create custom colors. The most accurate way to add pigment is by weight (using a gram scale). We recommend beginning by pre-mixing 2% pigment by weight to Part B and pre-mixing thoroughly. Do not exceed a 5% pigment load of the total weight (A+B). You can also use powdered cosmetic pigments to color Psycho Paint™, however a compatibility test is recommended.
Mixing ratio (by weight): 1: 1
Mixing ratio (by volume): 1: 1
Hardness (Shore D): 58 D
Processing time: 8.5 min
Hardening time: 2 h
Smooth-cast 305 castings after hardening are durable, machinable and colorable.
Mixing ratio (by volume): 1: 1
Mixing ratio (by weight): 100: 90
Hardness (Shore D): 70 D
Processing time: 7 min
Curing time: 30 min
Features
Ultra-black and darker than competitive black resins.
Can be polished and buffed to a high gloss shine.
Higher heat resistance vs. competitive black resins.
Does not contain mercury.
Less expensive vs. other black resins.
Pay in three equal instalments 3 x
Reviews
There are no reviews yet.