Home » SHOP » Fleur » Fleur Resin 1:1 Super Transparent – 1.9l

Fleur Resin 1:1 Super Transparent – 1.9l

Pay in three equal instalments 3 x  28.30

 84.91 (iesk. PVN)

Fleur epoxy resin, suitable for castings up to 3 cm thick

Mixing ratio: 1:1

Development time: 30 – 40 min

Curing time: 24 h

Crystal clear

Reģistrētie lietotāji, par pirkumiem virs 50 EUR saņem 1 IC punktu par katru iztērēto 1 EUR. Uzkrātos IC punktus var izmantot nākamo pasūtījumu daļējai apmaksai.
84 IC points in IC friend program
SKU: 12675 Category: Tags: , ,


Solvent-free, self-levelling, no VOC, UV-resistant, non-yellowing coating and casting resin ideal for achieving a high-gloss LIQUID GLASS EFFECT on any flat, non-absorbent surface. Use in a well-ventilated area. Perfect for tabletops, jewellery, silicone moulds, and artwork. The ideal depth of the pour is between 1 to 3 cm; for higher thickness pour more layers and let them dry between applications. Apply at temperatures between 21° and 29°C. Mix the two components in a single container in 1:1 proportion and stir slowly for three minutes. Allow to stand for two minutes and apply within 30-40 minutes. To eliminate air bubbles, apply some heat (for example, with a heat gun). For decorative effects, add Fleur Glitter, Pigments, and Dyes. Clean the tools with alcohol-based products.

Coverage: 1.9 m2 (thickness 1mm)

In the set: 950ml component A + 950ml component B.

Additional information

Weight 2 kg


There are no reviews yet.

Be the first to review “Fleur Resin 1:1 Super Transparent – 1.9l”