€ 56.80 (iesk. PVN)
Materials should be stored and used in a warm environment (73°F / 23°C). This material has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.
Mix the A and B components of two component silicone sytems before adding NOVOCS. Add the desired proportion of NOVOCS solvent to create a thinner silicone mixture which can be brushed or airbrushed onto the surface of a cured silicone casting.
Example Recommended Ratios For Use:
NOVOC solvents are low viscosity silicone solvents that evaporate quickly. NOVOC is particulary useful in thinning down Psycho Paint® silicone paint base to apply via brush or airbrush to cured platinum silicone rubber props and prosthetics. When used as a solvent for thinning silicone paints or surface coatings, NOVOCS™ Matte will leave a matte finish, NOVOCS Gloss will leave a gloss finish.
| Weight | 430 kg |
|---|---|
| Dimensions | 18 × 7 × 7 cm |
| TYPE: | Matte, Gloss |
You must be logged in to post a review.
The set includes 10x40ml:
4 x glitter types
4 x metallic tones
2 x pearl tones
Smooth-cast 65D castings after hardening are durable, machinable and colorable.
Mixing ratio (by volume): 1: 1
Mixing ratio (by weight): 100: 90
Hardness (Shore D): 65 D
Processing time: 2.5 min
Curing time: 15 min
Features:
Easy to apply
Fast drying
Effective over a broad temperature range from 70°F to 500°F
Excellent release
Precise duplication of mold details
Less rejects, faster production Matte finish
Ordering at least 3 units – 5% discount.
Smooth-cast 305 castings after hardening are durable, machinable and colorable.
Mixing ratio (by volume): 1: 1
Mixing ratio (by weight): 100: 90
Hardness (Shore D): 70 D
Processing time: 7 min
Curing time: 30 min
When you add Ignite fluorescent color to a urethane material, more ultraviolet light from the cured material is visible to your eye vs. castings made with SO Strong™ colorants. The casting appears brighter in ambient light and appears to glow under ultraviolet light.
Mix Ratio By Weight -100A:10B
Pot Life – 60 minutes
Cure Time – 24 hours
Shore Hardness – 18 A
Smooth-cast 60D cure quickly to semi-rigid plastics.
Mixing ratio (by volume): 1: 1
Mixing ratio (by weight): 100: 93
Hardness (Shore D): 60 D
Processing time: 5 min
Curing time: 30 min
Ease Release™ 2831, Wax-Based Non-Silicone Release Agent
Reviews
There are no reviews yet.