€ 31.06 (iesk. PVN)
Mix Ratio By Volume: 1A:1B
Mix Ratio By Weight: 1A:1B
Hardness (Shore A): 60 A
Pot Life: 6 min
Curing time: 16 h
Color: clear amber
Translucent clear amber color (light passes through) makes ECON™ 60 easy to color with SO STRONG™, UVO™ or IGNITE™ colorants. ECON™ 60 is used to make limited run production rubber molds, stamping pads, rubber prototype parts, rubber props and pour-in-place gaskets for industrial equipment. It is also suitable for coating fabrics.
| Weight | 0.9 kg |
|---|---|
| Dimensions | 15 × 8 × 20 cm |
You must be logged in to post a review.
Features:
Silicone content 12%
Easy to apply
Fast drying
Effective over a broad temperature range from 70°F to 500°F
Excellent release
Precise duplication of mold details
Features:
Easy to apply
Fast drying
Effective over a broad temperature range from 70°F to 500°F
Excellent release
Precise duplication of mold details
Less rejects, faster production Matte finish
Ordering at least 3 units – 5% discount.
Smooth-cast 326 castings after hardening are durable, machinable and colorable.
Mixing ratio (by volume): 1: 1
Mixing ratio (by weight): 115A:100B
Hardness (Shore D): 72 D
Processing time: 9 min
Curing time: 60 min
Color: Clear Amber
Measuring Is Done By Volume – The recommended mix ratio is 100 Parts A + 100 Part B + 200-500 Parts Solvent depending on your application (hand painting vs. airbrushing).
Adding Color To Psycho Paint – Silc Pig silicone pigments are compatible with Psycho Paint. There are several colors to choose from, and you can mix colors to create custom colors. The most accurate way to add pigment is by weight (using a gram scale). We recommend beginning by pre-mixing 2% pigment by weight to Part B and pre-mixing thoroughly. Do not exceed a 5% pigment load of the total weight (A+B). You can also use powdered cosmetic pigments to color Psycho Paint™, however a compatibility test is recommended.
Thanks to the innovative and patented z-shaped design with uniquely shaped holes, the Turbomix Paintsaver® is now capable of 30% faster stirring, which increases to almost 40% with metallic paints.
Mix Ratio By Weight -100A:10B
Pot Life – 60 minutes
Cure Time – 24 hours
Shore Hardness – 18 A
For maximum UV resistance, UVO™ pigment should be used with a UV-resistant material such as Crystal Clear™ plastics or Clear Flex™ rubbers. Recommended loading range is .01% to 3% of total system weight.
Mixing ratio: 1A:1B (by volume)
Final hardness: 80 shA
Pot life: 2.5 min
Setting time at room temperature: 10-15 min
Mixing ratio (by weight): 1: 1
Mixing ratio (by volume): 1: 1
Hardness (Shore D): 58 D
Processing time: 8.5 min
Hardening time: 2 h
Reviews
There are no reviews yet.