€ 5.81 – € 36.48 (iesk. PVN)
THI-VEX is made especially for thickening Smooth-On silicones for vertical surface application (making brush-on molds).
THI-VEX is made especially for thickening Smooth-On silicones for vertical surface application (making brush-on molds). Different viscosities can be attained by varying the amount of THI‑VEX added.
THI-VEX is added as a percentage of Part A and must be thoroughly mixed with Parts A and B.
THI-VEX™ will not work with Mold Max™ 40, Mold Max™ 60 or Solaris™ silicones.
| Weight | 0.5 kg |
|---|---|
| Dimensions | 8 × 8 × 15.5 cm |
| PACKAGE | 450g, 30g |
You must be logged in to post a review.
Mix Ratio By Weight -100A:10B
Pot Life – 60 minutes
Cure Time – 24 hours
Shore Hardness – 18 A
Mix Ratio By Weight -1A:1B
Pot Life – 25 minutes
Cure Time – 4 hours
Shore Hardness – 37 A
XTC-3D™ is a protective coating for smoothing and finishing 3D printed parts.
Mix Ratio (by volume): 2:1
Mix Ratio (by weight): 100:42
Shore Hardness (Shore D): 80 D
Working Time: 20 min
Tack Free Time: 4h (Thin Film Recoat Time 90 minutes)
Mixing ratio: 1A:1B (by volume)
Final hardness: 80 shA
Pot life: 5 min.
Setting time at room temperature: 90 min
Color: black
When you add Ignite fluorescent color to a urethane material, more ultraviolet light from the cured material is visible to your eye vs. castings made with SO Strong™ colorants. The casting appears brighter in ambient light and appears to glow under ultraviolet light.
Measuring Is Done By Volume – The recommended mix ratio is 100 Parts A + 100 Part B + 200-500 Parts Solvent depending on your application (hand painting vs. airbrushing).
Adding Color To Psycho Paint – Silc Pig silicone pigments are compatible with Psycho Paint. There are several colors to choose from, and you can mix colors to create custom colors. The most accurate way to add pigment is by weight (using a gram scale). We recommend beginning by pre-mixing 2% pigment by weight to Part B and pre-mixing thoroughly. Do not exceed a 5% pigment load of the total weight (A+B). You can also use powdered cosmetic pigments to color Psycho Paint™, however a compatibility test is recommended.
Mixing ratio: 1:1
Final hardness: 40 shA
Setting time at 23°C: 16 h
Working time: 30 min
Features:
Silicone content 12%
Easy to apply
Fast drying
Effective over a broad temperature range from 70°F to 500°F
Excellent release
Precise duplication of mold details
Smooth-cast 65D castings after hardening are durable, machinable and colorable.
Mixing ratio (by volume): 1: 1
Mixing ratio (by weight): 100: 90
Hardness (Shore D): 65 D
Processing time: 2.5 min
Curing time: 15 min
Mix Ratio By Volume: 1A:2B
Pot Life: 35 seconds
Cure Time: 2 hours
Foam Density: 3 lb/ft³
Mixed Viscosity: 1000 cps
Expansion (approximate): 15 times
Reviews
There are no reviews yet.