€ 20.96 (iesk. PVN)
For maximum UV resistance, UVO™ pigment should be used with a UV-resistant material such as Crystal Clear plastics or Clear Flex™ rubbers. Recommended loading range is .01% to 3% of total system weight.
UVO Colorants are concentrated, phthalate-free urethane color pigments that resist ultraviolet light. By adding a small amount of UVO to a Smooth-On epoxy, urethane rubber, plastic or foam product, these pigment dispersions will yield opaque castings (vs. SO-STRONG color tints that can yield translucent urethane castings). For glowing fluorescent color effects, use IGNITE colorants.
| Weight | 0.1 kg |
|---|---|
| Dimensions | 10 × 4 × 4 cm |
You must be logged in to post a review.
Crystal Clear 202 fully transparent polyurethane resin for castings up to 2 cm in thickness.
Mixing ratio (by weight): 100A: 90B
Hardness (Shore D): 80 D
Working time: 9 min
Curing time: 90 min
For maximum UV resistance, UVO™ pigment should be used with a UV-resistant material such as Crystal Clear™ plastics or Clear Flex™ rubbers. Recommended loading range is .01% to 3% of total system weight.
Mixing ratio (by weight): 1: 1
Mixing ratio (by volume): 1: 1
Hardness (Shore D): 58 D
Processing time: 8.5 min
Hardening time: 2 h
Pigments for tinting urethane rubbers, plastics, foams and epoxy systems.
Mixing ratio: 100A:3B (by weight)
Final hardness: 60 shA
Pot life: 40 min.
Setting time at room temperature: 24 h
Color: red
Measuring Is Done By Volume – The recommended mix ratio is 100 Parts A + 100 Part B + 200-500 Parts Solvent depending on your application (hand painting vs. airbrushing).
Adding Color To Psycho Paint – Silc Pig silicone pigments are compatible with Psycho Paint. There are several colors to choose from, and you can mix colors to create custom colors. The most accurate way to add pigment is by weight (using a gram scale). We recommend beginning by pre-mixing 2% pigment by weight to Part B and pre-mixing thoroughly. Do not exceed a 5% pigment load of the total weight (A+B). You can also use powdered cosmetic pigments to color Psycho Paint™, however a compatibility test is recommended.
Mixing ratio: 1:1
Final hardness: 40 shA
Setting time at 23°C: 16 h
Working time: 30 min
Features:
Silicone content 12%
Easy to apply
Fast drying
Effective over a broad temperature range from 70°F to 500°F
Excellent release
Precise duplication of mold details
Mix Ratio By Volume: 1A:2B
Pot Life: 35 seconds
Cure Time: 2 hours
Foam Density: 3 lb/ft³
Mixed Viscosity: 1000 cps
Expansion (approximate): 15 times
Thanks to the innovative and patented z-shaped design with uniquely shaped holes, the Turbomix Paintsaver® is now capable of 30% faster stirring, which increases to almost 40% with metallic paints.
Reviews
There are no reviews yet.