Fleur glow in the dark spray will make any object glow in the dark.
Excellent adhesion. Most surfaces do not require priming.
The coated surface dries in about 30 minutes. Apply 2 coats for best results.
With 100 ml of photoluminescent spray, you will cover approximately 0.3 m² of surface. Tested on non-absorbent and properly prepared surfaces in one coat.
| Weight | 0.5 kg |
|---|---|
| Dimensions | 12 × 6 × 6 cm |
You must be logged in to post a review.
Water-based Rust Effect product. It sticks on all surfaces and requires no protective finish. 1. Apply Step 1 on the surface by dabbing unevenly with a damp sea sponge. 2. Proceed with the application of Step 2 until the desired effect is achieved. 3. Let the product dry. TIP: For a dimensional Rust Effect, add the … Read More
A highly resistance SATIN varnish that’s suitable for both indoor and outdoor use. It forms an extremely resistant, flexible transparent finish. Solvent based. No primer is needed before applying the varnish. The varnish is quick drying, UV protection, without yellowing over time. Shake the vial well before use. Within 2-3 hours, the varnish will harden, creating … Read More
Water-based spray that turns any object into a magnetic surface. Odourless formula. It can be applied directly to most surfaces. For applications on porous surfaces, we recommend using the Wood Primer. For a perfect result, apply 5 layers of product. Wait 15 minutes between one coat and the other.
Fleur epoxy resin, suitable for castings up to 3 cm thick
Mixing ratio: 1:1
Development time: 30 – 40 min
Curing time: 24 h
Crystal clear
White acrylic primer, suitable for porous and absorbing surfaces such as: MDF, wood, plaster, terracotta, etc. Perfect for evening out the absorbing surface. After application, let it dry for 4 hours. Coverage:130 ml = 1,5m².
Reviews
There are no reviews yet.