Price range: € 24.56 through € 68.73 (iesk. PVN)
Skin Tite is used to create wounds, scars, and various effects directly on the skin.
Mixing ratio: 1A : 1B (by weight)
Pot life: 3 minutes
Cure time at room temperature: 5 minutes
Skin Tite silicone is skin-safe and is used to create wounds, scars, and various effects directly on the skin.
Once cured, the rubber is durable, flexible, and adheres well to the skin, even on moving areas such as elbows and knees.
By using Silc-Pig silicone pigments with Skin Tite, an unlimited range of colors can be achieved.
Skin Tite can also be used to attach silicone masks or prosthetic wounds to the skin.
| Weight | 0.3 kg |
|---|---|
| Dimensions | 15 × 10 × 5 cm |
| VOLUME: | 226 g, 0.9 kg |
You must be logged in to post a review.
ZA SFX 00-20 silicone is a bicomponent (base and catalyst) addition RTV 2 silicone rubber that vulcanizes at room temperature.
Mixing ratio: 1:1
Final hardness: 23 sh00
Working timeat 23°C: 25 min
Setting time at 23°C: 70 min
Vulcanized latex paste with an extremely low ammonia content.
Features:
Easy to apply
Fast drying
Effective over a broad temperature range from 70°F to 500°F
Excellent release
Precise duplication of mold details
Less rejects, faster production Matte finish
Ordering at least 3 units – 5% discount.
SIL-POXY can be used to repair torn silicone rubber molds.
Suitable for both tin- and platinum-based silicones.
Provides a strong, flexible bond.
Smooth-cast 60D cure quickly to semi-rigid plastics.
Mixing ratio (by volume): 1: 1
Mixing ratio (by weight): 100: 93
Hardness (Shore D): 60 D
Processing time: 5 min
Curing time: 30 min
Materials should be stored and used in a warm environment (73°F / 23°C). This material has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.
Mix the A and B components of two component silicone sytems before adding NOVOCS. Add the desired proportion of NOVOCS solvent to create a thinner silicone mixture which can be brushed or airbrushed onto the surface of a cured silicone casting.
Example Recommended Ratios For Use:
Ease Release™ 2831, Wax-Based Non-Silicone Release Agent
When you add Ignite fluorescent color to a urethane material, more ultraviolet light from the cured material is visible to your eye vs. castings made with SO Strong™ colorants. The casting appears brighter in ambient light and appears to glow under ultraviolet light.
For maximum UV resistance, UVO™ pigment should be used with a UV-resistant material such as Crystal Clear™ plastics or Clear Flex™ rubbers. Recommended loading range is .01% to 3% of total system weight.
The set contains nine different color pigments: blood colors, flesh colors, brown, red, black, green, blue, yellow, white.
Reviews
There are no reviews yet.