Description
SO-Strong™ liquid urethane colorant can be added to any Smooth-On liquid urethane rubber, urethane plastic or urethane foam (do not use with Smooth-On silicones).
So-Strong pigments for urethane and epoxy
Price range: € 23.96 through € 26.55 (iesk. PVN)
Pigment for tinting urethane rubbers, plastics, foams and epoxy systems.
It is recommended to add 0.01-3% of the total weight.
Reģistrētie lietotāji, par pirkumiem virs 50 EUR saņem 1 IC punktu par katru iztērēto 1 EUR. Uzkrātos IC punktus var izmantot nākamo pasūtījumu daļējai apmaksai.
23 IC points – 26 IC points in IC friend program
Additional information
| Weight | 0.56 kg |
|---|---|
| Dimensions | 10 × 4 × 4 cm |
| COLOR: | BLACK, RED, ORANGE, BLUE |
You must be logged in to post a review.
You may also like…
Ignite fluorescent color pigments 9x10g
When you add Ignite fluorescent color to a urethane material, more ultraviolet light from the cured material is visible to your eye vs. castings made with SO Strong™ colorants. The casting appears brighter in ambient light and appears to glow under ultraviolet light.
UVO Color Pigments 9x13g
For maximum UV resistance, UVO™ pigment should be used with a UV-resistant material such as Crystal Clear™ plastics or Clear Flex™ rubbers. Recommended loading range is .01% to 3% of total system weight.
Related Products
Feather Lite Lightweight Urethane Resin
Mixing ratio (by weight): 1: 1
Mixing ratio (by volume): 1: 1
Hardness (Shore D): 58 D
Processing time: 8.5 min
Hardening time: 2 h
SORTA-Clear 18 silicone
Mix Ratio By Weight -100A:10B
Pot Life – 60 minutes
Cure Time – 24 hours
Shore Hardness – 18 A
Smooth-Cast ONYX (fast) 0,99kg
Mixing ratio: 1A:1B (by volume)
Final hardness: 80 shA
Pot life: 2.5 min
Setting time at room temperature: 10-15 min
NOVOCS solvent 340g
Materials should be stored and used in a warm environment (73°F / 23°C). This material has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.
Mix the A and B components of two component silicone sytems before adding NOVOCS. Add the desired proportion of NOVOCS solvent to create a thinner silicone mixture which can be brushed or airbrushed onto the surface of a cured silicone casting.
Example Recommended Ratios For Use:
- When adding to Psycho Paint, add between 200%-400% NOVOCS™ solvent by weight
- When adding to Sil-Poxy, add between 300%-500% NOVOCS™ solvent by weight
Sold
€ 47.95 (iesk. PVN)
Read more
Silc-Pig Silicone Pigments
The set contains nine different color pigments: blood colors, flesh colors, brown, red, black, green, blue, yellow, white.
XTC-3D epoxy resin
XTC-3D™ is a protective coating for smoothing and finishing 3D printed parts.
Mix Ratio (by volume): 2:1
Mix Ratio (by weight): 100:42
Shore Hardness (Shore D): 80 D
Working Time: 20 min
Tack Free Time: 4h (Thin Film Recoat Time 90 minutes)
SORTA-Clear 37 silicone 0.9kg
Mix Ratio By Weight -1A:1B
Pot Life – 25 minutes
Cure Time – 4 hours
Shore Hardness – 37 A
Ease Release 200
Features:
Easy to apply
Fast drying
Effective over a broad temperature range from 70°F to 500°F
Excellent release
Precise duplication of mold details
Less rejects, faster production Matte finish
Ordering at least 3 units – 5% discount.
Reviews
There are no reviews yet.