Pay in three equal instalments 3 x Description
Two-component epoxy resin primer. Water-based primer with a white, slightly rough texture to optimize the adhesion of thick products, such as microcement, on surfaces like tiles and all non-absorbent surfaces, such as plastic, laminate, various types of metals, etc.
INSTRUCTIONS: Use on clean, dry surfaces. Before use on tiled surfaces and radiators, they should first be degreased. On surfaces such as doors, laminate, furniture, worktops, or lacquered wood – lightly sand the surface first with 100-grit sandpaper. Then degrease the surface.
If you want to treat a concrete floor that has just been freshly poured, it can only be done 28 days after pouring the floor. The surface must be dry.
USAGE: Mix each component separately. Then pour component B into component A and stir slowly for 2 minutes. The product is ready for use. Apply the product within 45 minutes! One 1L package can cover approximately 8m² in one coat.
If a second coat is needed, allow the first coat to dry for 12 hours.
Reviews
There are no reviews yet.