Mold Max 29NV tin-cured silicone 1kg
Mixing ratio: 100A:10B (by weight)
Final hardness: 29 shA
Pot life: 40 min.
Setting time at room temperature: 6 h
Color: yellow
Mold Max 30 tin-cured silicone
Mixing ratio: 100A:10B (by weight)
Final hardness: 30 shA
Pot life: 45 min.
Setting time at room temperature: 24 h
Color: pink
Accel-T tin solder silicone curing accelerator 74g
Accel-T is a single-component additive that accelerates the curing of tin silicone. With it, curing can be sped up from a 24-hour period to a few hours.
Mold Max 60 tin-cured silicone 1.03kg
Mixing ratio: 100A:3B (by weight)
Final hardness: 60 shA
Pot life: 40 min.
Setting time at room temperature: 24 h
Color: red
Flex Foam-iT! III 1.25kg
Mix Ratio By Volume: 1A:2B
Pot Life: 35 seconds
Cure Time: 2 hours
Foam Density: 3 lb/ft³
Mixed Viscosity: 1000 cps
Expansion (approximate): 15 times
Flex Foam-iT! V 0.88kg
Mix Ratio By Volume: 1A:2B
Mix Ratio By Weight: 105A:100B
Pot Life: 50 seconds
Cure Time: 2 hours
Foam Density: 5 lb/ft³
Mixed Viscosity: 1000 cps
Expansion (approximate): 11 times
Flex Foam-iT! 6 Pillow Soft Polyurethane Foam 0.88 kg
Flex Foam-iT! 6 Pillow Soft is a flexible polyurethane foam.
Mixing ratio (by volume): 1A:1B
Mixing ratio (by weight): 105A:100B
Working time: 35 seconds
Curing time: 2 hours
Color: white
Expansion (approximate): 10 times
Mixed viscosity: 1000 cps
XTEND-IT 283g
XTEND-IT is a dry gas blanket designed to extend the shelf life of unused moisture sensitive polyurethane products
Skin Tite 226g
SYSTEM CONTENT:
• Skin Tite part B – 113g
• Skin Tite part A – 113g
Mixing ratio: 1A:1B (by weight)
Pot life: 3 min.
Setting time at room temperature: 5 min
BODY DOUBLE release cream 100g
BODY DOUBLE Release Cream is a non-toxic skin conditioner that will aid in releasing BODY DOUBLE mold rubber from skin surfaces with or without hair. It washes off with soap and water. It is highly concentrated, so a little goes a long way. To use, wash intended body section with soap and water and dry thoroughly. … Read More
Ultimate Blood Kit 0.398 kg
SYSTEM CONTENT:
• Ultimate Blood Base – 254.5 gms
• Ultimate Blood Thixo – 25 gms
• Ultimate Blood Diluent – 35 gms
• Ultimate Blood red color – 28 gms
• Ultimate Blood Yellow Tint 28 gms
• Ultimate Blood Blue Tint – 28 gms
Psycho Paint platīna silikona krāsas bāze
Measuring Is Done By Volume – The recommended mix ratio is 100 Parts A + 100 Part B + 200-500 Parts Solvent depending on your application (hand painting vs. airbrushing).
Adding Color To Psycho Paint – Silc Pig silicone pigments are compatible with Psycho Paint. There are several colors to choose from, and you can mix colors to create custom colors. The most accurate way to add pigment is by weight (using a gram scale). We recommend beginning by pre-mixing 2% pigment by weight to Part B and pre-mixing thoroughly. Do not exceed a 5% pigment load of the total weight (A+B). You can also use powdered cosmetic pigments to color Psycho Paint™, however a compatibility test is recommended.
NOVOCS solvent 340g
Materials should be stored and used in a warm environment (73°F / 23°C). This material has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.
Mix the A and B components of two component silicone sytems before adding NOVOCS. Add the desired proportion of NOVOCS solvent to create a thinner silicone mixture which can be brushed or airbrushed onto the surface of a cured silicone casting.
Example Recommended Ratios For Use:
- When adding to Psycho Paint, add between 200%-400% NOVOCS™ solvent by weight
- When adding to Sil-Poxy, add between 300%-500% NOVOCS™ solvent by weight
SIL-Poxy Silicone Adhesive
- Can be used repairing torn silicone rubber molds.
- Will work with tin- or platinum-cure silicones
- Provides a strong, flexible bond
MT-13 epoxy-based adhesive 142g
MT-13 is a two-component epoxy-based adhesive in white color. Very strong adhesion and water resistance. Excellent for bonding wood, metal, ceramics, stone, and some plastics. Suitable for both porous and non-porous surfaces. Ideal for constructions and damage repairs.
THI-VEX Silicone Thickener
THI-VEX is made especially for thickening Smooth-On silicones for vertical surface application (making brush-on molds).
Silc-Pig Silicone Pigments
The set contains nine different color pigments: blood colors, flesh colors, brown, red, black, green, blue, yellow, white.
Silc Pig silicone pigments 113g
Silc Pig silicone pigments are used for coloring silicone products. Silc Pig pigments are concentrated, offer excellent dispersion, and even color. Only a small amount of pigment colors a proportionally large amount of silicone.
Silicone pigments 5g
Adding from 0.001-3%
SO-Strong pigments 9x10g
Pigments for tinting urethane rubbers, plastics, foams and epoxy systems.
So-Strong pigments for urethane and epoxy
Pigment for tinting urethane rubbers, plastics, foams and epoxy systems.
It is recommended to add 0.01-3% of the total weight.
Ignite fluorescent color pigments 9x10g
When you add Ignite fluorescent color to a urethane material, more ultraviolet light from the cured material is visible to your eye vs. castings made with SO Strong™ colorants. The casting appears brighter in ambient light and appears to glow under ultraviolet light.
UVO Color Pigments 9x13g
For maximum UV resistance, UVO™ pigment should be used with a UV-resistant material such as Crystal Clear™ plastics or Clear Flex™ rubbers. Recommended loading range is .01% to 3% of total system weight.
Silc Pig FLESH pigments 113g
SILG PIG silicone color pigments are used for coloring Smooth-On‘s silicone rubber compounds including MOLD MAX™ translucent ‘T‘ Series, DRAGON SKIN™ and ECOFLEX™ rubbers. SILG PIG™ pigments also are also used to create mind blowing skin effects with systems such as PSYCHO PAINT and SKIN TITE. Pigments are concentrated, recommended loading range is 0.001% to 3% … Read More
Ease Release ER283 release agent 0.36kg
Ease Release™ 2831, Wax-Based Non-Silicone Release Agent
Ease Release 200
Features:
Easy to apply
Fast drying
Effective over a broad temperature range from 70°F to 500°F
Excellent release
Precise duplication of mold details
Less rejects, faster production Matte finish
Ordering at least 3 units – 5% discount.
Ease Release 200
Ease Release 205 is an analog of Ease Release 200, but in liquid form rather than aerosol. It is an excellent, widely applicable release and pourable agent in a metal bottle.
Universal Mold Release
Features:
Silicone content 12%
Easy to apply
Fast drying
Effective over a broad temperature range from 70°F to 500°F
Excellent release
Precise duplication of mold details
SupraleasePTR Separator 400ml
SupraleasePTR is an industrial petroleum jelly-based (silicone-free) release agent designed to easily separate casting material from mold surfaces. It is ideal for releasing liquid silicone rubber from various surfaces, including clay, plasters, plastics, metals, and wood.
Bamboo stir sticks 230x20x2mm
Practical, smooth, and environmentally friendly sticks for mixing various liquids. They are made from natural bamboo.
COLAD Turbomix
Thanks to the innovative and patented z-shaped design with uniquely shaped holes, the Turbomix Paintsaver® is now capable of 30% faster stirring, which increases to almost 40% with metallic paints.